NOKIA N-Series Trick : Real Player shortcuts

Press the joystick/rocker side to side to increase or decrease volume
Press (and hold) joystick/rocker up or down to skip forwards or rewind
Press the center select to Pause/Play
Press the '2' key to switch to full screen mode (in some cases it's the 5 key)

NOKIA N-Series Trick :

Here are some Tricks :

1. Is the "Universal number"
If you find yourself out of coverage area and there is an emergency, dial 112 to make your mobile search any existing network that can connect the call for you, 112 is the worldwide emergency number, it can even be dialed even if the keypads's lock. try it!

2. The "Secret car keys"
You can pull this off only if you have a spare remote key. Say, you left your keys in the locked car and the spare's at home. Using your mobile phone, call someone at home from their cell phone. hold your phone about a foot from your car door and have the person at home press the unlock button, holding it near the mobile phone on thier end. radio signals will pass through and your car will unlock...

3. Disable stolen phone
To check your phone's serial number, key in *#06#. A 15 digit code will apear on screen, write it down and keep it safe. when your phone gets stolen, phone the NTC and give them the serial code. they can block your handset so even if the thief changes SIM, your phone will be totally useless.

Connect Internet using bluetooth on your NOKIA phone :

Step by step :

Creating an access point on your phone!

tools\settings\connection\access points\options\new access point>default settings...

these are the settings u need there..

Connection Name : Anything (sugestion ADLS or PCGPRS something u remember well cuz u'll need it later!)

Data Bearer: GPRS

Access Point Name: The name you gave to your bt connection when pairing up with the computer...

Username : None

Password : No

Authentication : Normal

Gateway IP Address : 0.0.0.0

and that's all on this on this part..

then go to:

tools/settings/connection, and select GPRS

set the GPRS connection to "when available", and the access point to "none".

The settings on your fone are done! now... the next step;

Create a serial port connection from ur pc to ur phone (u've done this before if u ever used Pcsuite from nokia), this serial connection must be on everytime you want to use your pc internet connection as a gprs connection for ur phone!!

Install the software u need to surf the web (opera, netfront, agile messenger for chat, etc..)

Bluetooth Connection Guide 1 :

This is a "How To" for Connecting the Nokia Series 60 device (Nokia 7650, 6600, 3650, 3660 etc...) via Bluetooth TM with the Windows Widcomm software used by TDK, Billington, MSI and others Bluetooth USB Vendors. The guide was created with the 7650 hadset but the steps are similar for other Series 60 devices and have been checked with the 3650 and 6600.

1. Pairing the computer and the Series 60 Handset
Pairing is the process of swapping pass keys and setting up a trusted connection between the Bluetooth USB adapter / card connected to the PC and the 7650 handset. Save any files and close any applications you may have been working on.

2. Set up Bluetooth TM on the 7650 by going to the Main Menu, selecting Connect and then Bluetooth.

3. Make sure the Bluetooth option is On and My Phone's Visibility is Shown to all. Remember what is in My Bluetooth Name - or edit it to one of your choice - this is what your 7650 will be seen as by other Bluetooth TM devices.

4. Right Click on the Bluetooth Icon in the system tray, on the menu that appears go to Setup and then click on Security.

5. A window appears and all being well the right hand pane will have your 7650 (titled what ever you have entered into the phone's My Bluetooth Name entry). If nothing appears click Refresh and your phone should then appear. Highlight the 7650 and click Execute Pairing.

6. A window will pop up asking for a PassKey. Enter in a numeric only passkey and click OK.

7. On the 7650 a screen pops up asking you to enter a passkey - key in the same number you just typed into the PC.

8. By default any connections from your PC to the 7650 must be manually accepted on the 7650. You have an option to set up a connection from the PC to your 7650 as authorized, this means when you connect from the PC to the phone it won't ask you if it's ok and will connect automatically.

9. To set it as automatic: On the 7650 in the Bluetooth TM Setting Screen, you joystick right to the Paired Devices screen, highlight the Computer you just paired with and press Options, select Set as Authorized and Yes. You will then see a padlock icon beside the paired device - this device will no longer require manual authorization for connections to the 7650.

Now you should set My phone's visibility to Hidden - so that unknown devices searching won't see your phone. You can still be connected to by any paired devices. Remember to switch it to Visible if you want to pair with a new device or receive a file / business card from someone with an unpaired device.

Bluetooth Connection Guide 2

Manually make a serial connection to the Series 60 Handset to get the mRouter connection started:

1. To get a connection working you need one last step - you need to connect to the 7650's Bluetooh Serial port from the PC.

2.Right Click on the Bluetooth TM Icon in the system tray, on the menu that appears go to Services and then click on Bluetooth TM Serial Port. Select Find Devices from the sub menu. (A shortcut to this connection will be created so next time you will have the 7650 listed in Bluetooh Serial Port submenu to save the next step).

3. Select the 7650 from list and click Connect.

4. A window will appear telling you the connection is starting.

5. If you have not set the 7650 to automatically authorize a connection from this computer be ready to accept the connection request on the phone. If you have set it to automatically authorize then you won't be asked.

6. You should also see the Bluetooth icon on the 7650 start to flash showing a connection take place. Then you may get an error on the PC saying it can't connect and/or a message saying there is a Connection on COM0 (you can check the box to stop this appearing again), you can just ignore these message(s) for a minute. (Click OK once the mRouter connection is made described below.)

A couple of seconds later the mRouter icon in the tray shows a connection in starting and then a connection being made. You can see also the active connection in the mRouter Connection Properties. The PC Suite application should then be ready for use.